nominal capacity @ 1 ma, to 2v 1.1 ah rated voltage 3.6 v maximum recommended continuous current 50 ma maximum pulse current capability 100 ma weight 9.6 g (0.339 oz) volume 4 cc operating temperature range -55 oc to +85 oc li metal content approx. 0.35 g u.l. component recognition, mh 12193 suffix- /s standard 15-5902-21530 suffix- /t solder tabs 15-5902-31530 suffix- /p axial pins 15-5902-41530 suffix- /pt2 radial pins 15-5902-36530 suffix- /tp polarized tabs 15-5902-52530 suffix- /pt polarized tabs 15-5902-53530 technical data (typical values @+25 oc for batteries stored for one year or less) international size reference: 1/2aa, er14252 model TLL-5902 note: any presentations in this data sheet concerning performance are for info rmation purpose only and are not construed as warranties either expressed or im plied, of future performance. terminations & ordering no. ixtra - long term high performance rev. c 11/05 page 1 of 2 discharge characteristics @ +25oc 220 ? ~14 ma (0.80 ah) 470 ? ~7 ma (0.97 ah) 3.6 k ? ~1 ma (1.10 ah) 27 k ? ~0.125 ma (1.08 ah) 40 k ? ~40 a (1.02 ah) 220 k ? ~17 a (0.92 ah) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1 10 100 1000 10000 100000 hours volts voltage vs. temperature 14 ma 7 ma 2 ma 0.8 ma 17 a 4 a 2.5 2.7 2.9 3.1 3.3 3.5 3.7 -50 -30 -10 10 30 50 70 90 oc volts capacity vs. current -30 c 25 c 55 c 72 c 10 1 0.1 0.01 0.2 0.4 0.6 0.8 1.0 1.2 ma ah
voltage response after 1 year after 2 years after 4 years after 7 years 3.1 3.2 3.3 3.4 3.5 0 20 40 60 80 100 120 msec volts voltage response after 1 year after 5 years after 10 years 3.1 3.2 3.3 3.4 3.5 0 20 40 60 80 100 120 msec volts 3.6 v primary lithium-thi onyl chloride (li-socl2) fast voltage recovery after long term storage and/or usage high energy density high and stable operating voltage low self discharge rate 10 years shelf life bobbin construction hermetic glass-to-metal-sealing non-flammable electrolyte non-restricted for trans p ortation cell features TLL-5902 note: any presentations in this data sheet concerning performance are for info rmation purpose only and are not construed as warranties either expressed or im plied, of future performance. ixtra - long term high performance rev. c 11/05 page 2 of 2 main applications utility meters (elect., water & gas) automatic meter reading rf systems sensors & monitoring systems tracking systems wireless security systems automotive electronics industrial electronics ultra low power (ulp) devices others cells should be stored in a clean & dry (less than 30 % rh) area temp. should not exceed +30 oc storage conditions for updated information please visit our website www.tadiranbat.com pulse applied: 10 ma for 100 msec temperature: rt background current: 10 a pulse applied: 10 ma for 100 msec temperature: rt background current: 5 a voltage response after storage after 1 year after 2 years after 5 years after 10 years 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 0 200 400 600 800 1000 1200 msec volts pulse applied: 10 ma for 1 sec storage: rt background current: none
|
